COMPANY NEWS AND PRESS RELEASES FROM OTHER SOURCES: ComCam Brings Cingular Wireless 3G Into View
WEST CHESTER, Pa., Aug 15, 2006 /PRNewswire-FirstCall via COMTEX/ -- ComCam International, a subsidiary of ComCam, Inc. (OTC Bulletin Board: CMCA), a networked video solutions company, announced that it has validated the Sierra Wireless AirCard(R) 860 running on Cingular Wireless networks. Cingular Wireless, LLC, is a joint venture between AT&T Inc. and BellSouth Corporation.
According to ComCam's CEO, Don Gilbreath, "ComCam MicroServers and cameras are now operable over Cingular Wireless 3G Broadband Network using the Sierra Wireless AirCard(R) 860, thus enabling ComCam video command and control technology over a national wireless network. Now Cingular joins our growing list of approved networks. From the small-town suburban backyard to national borders, setting up wireless cameras just got easier. ComCam video MicroServers can easily connect to a user's favorite surveillance camera and ComCam's Web-based DVR, the ComCam VideoLocker(TM). Now our users have an easy solution for viewing, controlling and archiving video and other sensor data with an easy to get wireless broadband service. For our dealers this represents an even more compelling technology bundle by virtue of its simplicity and ability to reach new markets and uses."
ComCam develops network video command and control products as well as provides solutions and technical services to US government agencies, Fortune 500 companies, research facilities and original equipment manufacturers, systems integrators and dealers worldwide. Its goal is to enable disparate hardware technologies not only to communicate better with each other but also to enhance human communications employing these technologies. VideoLocker(TM) is a trademark of ComCam International Inc. All other trademarks or registered trademarks belong to their respective owners.
A number of statements contained in this press release may be considered to be forward-looking statements that are made pursuant to the safe harbor provisions of the Private Securities Litigation Act of 1995. These forward-looking statements involve a number of risks and uncertainties, including timely development, market acceptance of products and technologies, competitive market conditions, successful integration of acquisitions and the ability to secure additional sources of financing. The actual results the Company may achieve could differ materially from any forward-looking statements due to such risks and uncertainties. The Company encourages the public to read the information provided here in conjunction with its most recent filings on Form 10KSB and Form 10QSB. The Company's public filings may be viewed at http://www.sec.gov.
Contacts: David Rosen V.P., Corporate Development ComCam International, Inc. Tel. 610.436.8089 drosen*comcam.net http://www.comcam.net
This one is low float.
Shares Outstanding: 30.41M Float: 23.73M
Don't get much better than this coming off 52 week low.
IP: Logged |
posted
This low floater going to run big one day just a matter of time.
***.com: Comcam Inc. To Appear on ***.com Friday , September 22, 2006 03:39 ET
WEST CHESTER, Pa., Sep 22, 2006 (M2 PRESSWIRE via COMTEX) -- Don Gilbreath, Founder and CEO of ComCam Inc. (OTC BB: CMCA), will be featured live on Market News First (www.***.com) for an exclusive interview with the *** news team. The interview is scheduled for Sept. 28, 2006, at 9:00AM CDT.
(OTC BB: CMCA) ComCam, Inc. operates as a business development company. The company, through its wholly owned subsidiary, ComCam International, Inc., engages in the development and provision of Internet Protocol (IP) wired and wireless video products and solutions worldwide. It offers remote video and control products, solutions, and services to the fixed and mobile security markets as well as provides telemedicine, transportation monitoring, process control and customized solutions to the transportation, process control and other markets. The company's core technology is a computing platform with an operating system, firmware, software applications, and development tools. Its COMCAM 10 series, an IP-surveillance solution, works in various wired and wireless networks and is applied in homeland security, government, and commercial markets. The COMCAM 10 series system allows users to capture and store live video feeds locally on a hard drive inside the camera for later transmission. Its IP solution creates digitized video streams that enable remote monitoring over the network or the Internet. The company sells its products to and through defense contractors, system integrators, and distributors.
Join Don Gilbreath to learn more about the goals of the company, as well as its position in the stock market.
IP: Logged |
posted
ComCam at ASIS to Support Launch of the NVS 'Perceptor' System Monday , September 25, 2006 15:41 ET
WEST CHESTER, Pa., Sept. 25, 2006, Sep 25, 2006 (PRIMEZONE via COMTEX) -- ComCam International, a subsidiary of ComCam, Inc. (OTCBB:CMCA) ("Company"), a pioneering developer of Internet Protocol (IP) video-networking solutions, announced today that it will participate at the ASIS International security show with Night Vision Systems (NVS), a DRS Technologies company.
ComCam will be demonstrating its 'Pocket C3,' a wireless network camera command-and-control platform running on Symbol's mobile computing devices. It will run with NVS's current line of infrared, thermal and visible-light cameras. According to ComCam's CEO, Don Gilbreath, "We are excited to be at this years ASIS as part of the launch of NVS integrated intelligent camera system, 'Perceptor.' We are proud of the contribution we made as part of the technical design team. As a result of this alliance, the Perceptor has the most sophisticated on-board motion analysis and thermal imaging capability on the market today."
The Perceptor was designed by NVS as a best-in-class technology, integrating Vanadium Oxide (VOx) thermal imaging, available in either 640x480 or 320x240 resolution. This uncooled high performance thermal imaging technology is already deployed by the military in thousands of thermal weapon sights and other systems. An optional secondary sensor for daytime or low lux viewing is available. The Perceptor will be offered in both fixed and pan/tilt configurations and is environmentally rugged to withstand rain, snow, ice, humidity, dust and fog.
"We are delighted to work with ComCam as a strategic partner," said Chris Wright, Vice President and General Manager, Night Vision Systems. "This partnership allows us to offer the customer a best-in-class solution for their security needs."
The ASIS International Conference runs September 25-27, 2006, at the San Diego Convention Center, San Diego, CA. Come visit ComCam at the NVS booth No. 5761. http://www.asisonline.org
About Night Vision Systems
As a business unit of DRS Technologies, NVS is a leader in night vision technology and sensors, based in Allentown, Pennsylvania. NVS offers night vision devices, uncooled thermal imaging systems, lasers and a variety of combat identification tools for military (ground/airborne/maritime), security, public safety, federal and local government. For more information, visit http://www.nightvisionsystems.com.
ComCam Signs Distribution Agreement with ScanSource Featuring a Wireless CCTV Security Product with Symbol Mobile Computers PR Newswire - November 06, 2006 08:53
WEST CHESTER, Pa., Nov 06, 2006 /PRNewswire-FirstCall via COMTEX/ -- ComCam International, a pioneer developer of enterprise video networking and a subsidiary of ComCam, Inc. (OTC Bulletin Board: CMCA), announced today that it has entered into a non-exclusive distribution agreement with ScanSource Security Distribution, Inc. (Nasdaq: SCSC) for a WCCTV kit.
ComCam's CEO Don Gilbreath explained, "Our WCCTV kit converts an existing CCTV camera into a rugged portable wireless system. Imagine a security guard (or team) at a large facility no longer anchored to a monitoring station. By using ComCam technology and a Symbol handheld mobile computer, the security guard can now make rounds using cameras in remote areas with our easy-to-implement system."
According to Tony Sorrento, vice president of merchandising for ScanSource Security Distribution, "ComCam's products will enable resellers to take their security solutions to another level, allowing more options for fixed and mobile security applications. The WCCTV conversion kit provides wireless connectivity and mobility for the CCTV security sector. Our relationship with Symbol makes this partnership a natural."
The WCCTV conversion kit consists of a ComCam-10 MicroServer and either a Symbol MC50 or MC70 Enterprise Digital Assistant (EDA) and will run ComCam's "Pocket C3" command-and-control and display software. This solution works with commercial and military grade pan-tilt-zoom cameras as a remote device, or in control room with 100's of cameras through an existing video switch, giving the cameras wireless IP networking capabilities and providing both video display and camera control on a rugged handheld device.
ScanSource Security Distribution is a leading distributor of physical security products including access control, surveillance/CCTV, intrusion, fire and identification products. A sales unit of international specialty technology distributor ScanSource, Inc., ScanSource Security works with its reseller partners and dealers to deliver innovative security products to the marketplace. http://www.scansource.com.
ComCam develops network video command-and-control products and provides solutions and technical services to U.S. government agencies, Fortune 500 companies, research facilities and original equipment manufacturers, systems integrators and dealers worldwide. ComCam continues to enable disparate hardware technologies not only to communicate better with each other but to enhance human communications employing these technologies
A number of statements contained in this press release may be considered to be forward-looking statements pursuant to the safe harbor provisions of the Private Securities Litigation Reform Act of 1995. These forward-looking statements involve a number of risks and uncertainties including timely development, market acceptance of products and technologies, competitive market conditions, successful integration of acquisitions and the ability to secure additional sources of financing. The actual results the Company may achieve could differ materially from any forward-looking statements due to such risks and uncertainties. The Company encourages the public to read the information provided here in conjunction with its most recent filings on Form 10KSB and Form 10QSB. The Company's public filings may be viewed at http://www.sec.gov.
UBBFriend: Email this page to someone!
Printer-friendly view of this topic
